In two years, all makers of heavy-duty trucks will be required to add electronic stability-control (ESC) systems to new vehicles. This is an effort by the U.S. government to prevent rollover crashes that kill about 300 drivers a year and injure 3,000 others. The technology uses engine torque and computer-controlled braking to help truckers maintain control in emergencies by keeping the wheels on the ground and the trailers from swinging. The regulatory requirement, proposed in 2012, is estimated to cost $585 per truck, the National Highway Traffic Safety Administration (NHTSA) said in a statement on Wednesday.
The final regulation mostly targets rollover crashes caused by driver error in steering large trucks, particularly on sharp curves and exit ramps. Though they accounted for 3.3 percent of all large-truck crashes, rollovers were responsible for more than half the deaths of drivers and occupants in 2012, according to the latest available data. Some buses also are affected by the rule. NHTSA Administrator Mark Rosekind said:
Reducing crashes through ESC in these trucks and buses will save lives. It will move goods and people more efficiently and reduce the toll crashes take on our economy through traffic delays and property damage.
NHTSA said that installing ESC on new trucks will prevent as many as 1,759 crashes and 49 fatalities a year. The new rules have been recommended by the National Transportation Safety Board (NTSB) since 2011. The rules will apply to new trucks made after Aug. 1, 2017, that weigh more than 26,000 pounds. An extra year is being given for passenger buses weighing more than 33,000 pounds.
Not all in the trucking industry disagreed with the mandate. For example, The American Trucking Association, representing most of the largest U.S. freight carriers, said the action would reduce “one of the greatest threats to driver safety.“ Dave Osiecki, the Arlington, Va.-based group’s executive vice president, had this to say: “Many fleets have already begun voluntarily utilizing this technology, and this new requirement will only speed that process.”
Taking a different view, The Owner-Operator Independent Drivers Association, which represents 150,000 small-business truckers, said NHTSA’s action was another sign the government is relying on equipment rather than experienced drivers to improve safety. Todd Spencer, the Grain Valley, Mo.-based group’s executive vice president, said:
Too many have become addicted to technology. If any of this really improves safety, that should be evident where the rubber meets the road. We simply don’t see it in the vast majority of instances.
NHTSA estimates the industry will need to spend $45.6 million to comply with the regulations. The agency estimated the benefits — through fewer crashes, injuries and fatalities — to be far larger, from $312 million to $525 million. The agency estimates that electronic stability control, marketed by companies such as Bendix, a unit of German parts maker Knorr-Bremse AG, will prevent about 56 percent of untripped rollover crashes.
Some companies were pushing the agency to permit a less expensive technology known as roll stability control instead of ESC. Regulators looked at the costs and benefits of requiring roll stability control, which has been sold by Meritor Wabco, a joint venture between Meritor Inc. and Wabco Holdings Inc.
NHTSA said that while the technology would cost, on average, about $194 less per truck, the benefits through avoided crashes would be far lower because the systems don’t prevent nearly as many rollover crashes. Truck manufacturers will have to demonstrate compliance with the new rules through a road test known as a J-turn, which involves accelerating at a constant speed before maintaining a lane on a curve with a 150-foot radius. It will be most interesting to see how this mandate for the trucking industry to use ESC will affect highway safety. Hopefully, it will save lives and make our highways safer.
Source: Claims Journal
Contact us today for a free legal consultation with an experienced attorney.
Fields marked *may be required for submission.
If you would like to subscribe to the Jere Beasley Report digital edition, simply visit our Subscriptions page and provide the necessary information or call us at 800-898-2034.
Attorney Advertising - Prior results do not guarantee a similar outcome.