Two men were killed in a Nevada mining accident partly because someone wedged a broom handle against a reset button to bypass an alarm that would have shut down the system. According to the Mine Safety and Health Administration, managers of Barrick Goldstrike’s Meikle Mine are responsible for the August 2010 accident in Carlin that killed Daniel Noel, and Joel Schorr. The two men were struck by a pipe that gave way in a ventilation shaft because it was clogged with excessive waste rock material.
MSHA said the pipe overfilled because the broom handle kept the loading system from tripping off. The agency blames managers for failing to ensure the safe operation, inspection and maintenance of the mine. The report from MSHA said:
Management failed to ensure that the pipe, its support system, and electrical system were maintained in a safe condition to protect all persons who could be exposed to a hazard from any failure of the system. Additionally, management failed to maintain the electrical sensors and alarm systems and ensure that these systems could not be by-passed. A broom handle was used to wedge the electrical control panel reset button so the aggregate delivery system would continue to operate and not trip out.
MSHA issued Toronto-based Barrick six safety violations as a result of the accident. MSHA terminated the last of the safety orders stemming from those violations on June 21 after Barrick constructed a new aggregate delivery system that eliminated the hazards. The men were being lowered in the cage to inspect the pipe when the accident occurred about 2 a.m. on Aug. 12, 2010. Rescue crews found their bodies 32 hours later at an area about 1,300 feet below ground at the mine about 55 miles northwest of Elko and 275 miles northeast of Reno. It marked the sixth and seventh fatalities at the mine since it opened in 1994.
One worker told investigators he had been asked to be on lookout on the day shift before the accident “because another employee had wedged a broom handle against the electrical control panel reset button and he wanted to be alerted if a supervisor was approaching,” according to MSHA’s report. Investigators for MSHA discovered a modified broom handle hidden near the instrument panel reset button. The report said:
The end of the broom handle had been shaped with a notch of the correct size to allow it to be used to jam the panel reset button. Investigators positioned the broom handle and found it to fit perfectly when wedged between an electrical junction box and the instrument panel reset button.
This sort of thing evidences a total disregard for safety of employees working in coal mines and indicates the use of the handle wasn’t a one-time happening.
Source: Claims Journal
Contact us today for a free legal consultation with an experienced attorney.
Fields marked *may be required for submission.
If you would like to subscribe to the Jere Beasley Report digital edition, simply visit our Subscriptions page and provide the necessary information or call us at 800-898-2034.
Attorney Advertising - Prior results do not guarantee a similar outcome.